Skip to end of metadata
Go to start of metadata

AND

Do logical operation on input pots and outputs result to [out] port. True port is triggered if the result was true, otherwise, the false port is triggered.

All

Triggers the output when all connected inputs are triggered.

Any

Triggers the output when any of the inputs have been triggered.

Blocker

If enable blocks [In] signals, otherwise passes them to [Out].

Condition

Node to route data flow based on a boolean condition. Setting input [Value] will route it either to [OnFalse] or [OnTrue].

ConditionInverse

Node to route data flow based on a boolean condition. Depending on [Condition], either input [True] or [False] will be redirected to [out].

CountBlocker

The value triggered into 'in' is sent to 'out' a maximum number of times.

DeMuliplexer

Pushes the input to the selected (via Index) output port. 3 different modes:

  • InputOnly: Only [Input] triggers output.
  • IndexOnly: Only [Index] triggers output.
  • Both: Both [Input] and [Index] trigger output.

Gate

If closed, blocks [In] signals, otherwise pass them to [Out].

Indexer

Whenever an input port is activated, returns the index of that pot [1-8]. WARNING: Does not account for multiple activations on different pots!

Multiplexer

Selects one of the inputs using the Index and sends it to the output. 3 Different modes!

  • IndexOnly: Only [Index] triggers output.
  • PortsOnly: Only Port[Index] triggers output.
  • Always: Both [Index] and Port[Index] trigger output.

NOT

Inverts [in] port, [out] port will output true when [in] is false, and will output false when [in] is true.

NoSerializeOnce

Triggers only once and passes from activated Input port to output port [Out]. WARNING!! The triggered flag is not serialized on savegame!. This means that even if a previous savegame is loaded after the node has been triggered, the node won't be triggered again.

OR

Do logical operation on input ports and outputs result to [out] port. True port is triggered if the result was true, otherwise, the false port is triggered.

OnChange

Only send [in] value into the [out] when it is different from the previous value.

Once

Triggers only once and passes from activated Input port to output port [Out].

RandomSelect

Passes the activated input value to a random amount [outMin <= random <= outMax] outputs.

RandomTrigger

On each [In] trigger triggers one of the connected outputs in random order.

Sequentializer

On each [In] trigger triggers one of the connected outputs in sequential order.

In this example, we're using the last output from the first Sequentializer node to open/close gates in order to activate the second Sequentializer node. This allows infinite daisy-chaining of sequential events and looped options.

XOR

Do logical operation on input ports and outputs result to out port. True port is triggered if the result was true, otherwise, the false port is triggered.

On This Page

  • No labels