Creating Mini Maps

The Sandbox Editor has a built in tool for creating minimaps. Note that Scaleform needs to be installed in order to use minimaps.

Preparing to Create a Minimap

When creating a minimap, there are certain console variables that are better left turned off. Specific adjustment of cvars for minimaps are controlled in the MapScreenshotSettings.xml file. You can edit this file, located in the \Editor folder, with a text editor. There is also a shortcut to the file built into the Mini Map Tool on the RollupBar.

A lot of the settings contained in the MapScreenShotSettings can be tweaked to create the most desirable results, but make sure to create a backup copy of the original MapscreenshotSettings.xml.

<r_HDRRendering value="0">
<r_PostProcessEffects value="0">
<e_ScreenShotQuality value="0">
<e_ViewDistRatio value="10000">
<e_VegetationSpritesDistanceRatio value="20">
<e_ViewDistRatioVegetation value="100">
<e_Lods value="0">
<e_TerrainLodRatio value="0">
<e_Vegetation value="0">

Creating a Minimap

First, open the desired level in the Sandbox Editor.

Next, open the minimap function located on the RollupBar, on the Terrain pane.

After pressing the minimap button, a green bounding box, and a smaller blue "selection" box will appear on the terrain. It is helpful to zoom far away from the terrain in order to see the entire area If you cannot see the terrain after zooming out, try increasing the ViewDistance setting under the Environment tab.

To move the minimap bounding box, click on a different section of the terrain where you want to create your minimap.

The green bounding box shows the area that will be made into a minimap image, adjusting the camera height will therefore change the size of it. To change the Camera Height, put the preferred height into the input box.

Make sure that the minimap bounding box is actually bigger than the actual play area of your map. Failing to do so can lead to anomalies if the player stands on the border of your map.

Adjusting the Resolution in the minimap properties will increase the size of the minimap image that the Editor generates. For example, choosing a resolution of 2048 will give you a minimap image of 2048x2048 pixels.

Note: You should only choose to use very large resolutions (8192 or 16384) if you are running the editor on a very high spec system with a minimum of 8 GB of ram.

After you have moved the box and set the Resolution and Camera Height, select the Output directory and one of both of the file formats (.dds and .tif). Now press Generate MiniMap.

A quick succession of images will flash in the upper left corner of the Editor, showing that your minimap is being created; this can take a few minutes depending on the Camera Height, Resolution and MapScreenshotSettings.xml.

After the editor has finished, your minimap will be placed in \Game\ScreenShots\Map along with an .xml file.

The .xml file provides the CryENGINE with the map coordinates so that the player position is correctly displayed on the minimap.

h2. Preparing the Minimap

h3. Step 1

In Photoshop, open up the minimap image file that was just created.

To make sure that your minimap will display correctly in the game, you will need to desaturate the image and tweak its levels.

h3. Step 2

To desaturate your minimap image, go to Image>Adjustments>Desaturate, this will essentially make your minimap black & white.

h3. Step 3

Now, adjust the levels as a color overlay will be applied on top of the final image, you will need to have some outstanding black and white and clear grey tones, the better the levels are adjusted the more details players will be able to recognize.

Try to avoid creating completely black areas.

To start off, go to Image>Adjustments>Levels, this will open up the "levels" output box.


By adjusting the input levels you can create a well contrasted image.

h3. Step 4

Now Go to File>Save As, this will open up the save as window, under formats choose the crytifplugin.


Go press *save now* as this will start the *crytifplugin*, which has a wide range of settings and options. For creating MiniMaps you will only need to use a few.

h3. Step 5

First, change the Preset option from its default (diffuse_highQ) to *Minimap*.


h3. Step 6

Next go to the *Advanced* pane and check to make sure that "Auto Optimize file" is deselected.


You can now press *OK*, and *crytifplugin* will now create a .TIF file -- don't worry about the end file size.
The Resource Compiler will automatically create a .dds file for the target platform, specified in its settings.

*IMPORTANT:* You do not need the CryTifPugin for Photoshop to create a minimap. You can also use the .dds plugin from Nvidia to export the minimaps as DXT1.

h3. Step 7

The minimap is now ready to be used, select the .TIF file and the .xml file that was created when you made your minimap and copy both files to your map folder.

If you already have an .xml file located in your map folder, you can merely open it with a text editor.

Inside the .xml file you will need to edit the numbers in the first line that shows the *startX*, *startY*, *endX*, and *endY*. Exchange the numbers here with the numbers located in your minimap .xml file.


Make sure that the *MiniMap Filename* points to the filename of your new minimap .dds image file.


Instead of putting in .TIF as the file definition you will need to put in .dds instead (the one the Resource Compiler will create from the .TIF, or you manually created via the NVIDIA plugin).

*Note:* If there are no numbers located in the .xml file, just copy the whole line from your minimap .xml file.

The minimap is now visible in the map.

h2. Adding Detail to the Minimap

This process will require you to create several smaller pieces of your minimap and then later put them together using Photoshop.

This is generally only a process you will have to do if your PC is not able to handle the creation of high resolution minimaps.

Before starting, make sure that you have the *NVIDIA Texture Tools* installed in Photoshop. ([|])

h3. Step 1

Now, using Photoshop open your minimap .DDS file. The NVIDIA tools will recognize it and open up this property window, here you can just press *OK* .


With the minimap opened you can see here on this example below that the quality at 100% is not the best.


h3. Step 2

Go back to the Editor, and select the minimap function.

For higher quality it's enough to change *Camera Height* and keep the resolution to the original minimap, this is important otherwise you will run into issues with image sizes not matching.

You will also need to change the lines listed below, in the *MapScreenshotSettings.xml*. These settings will raise the quality and the amount of objects visible.

<E_LOD_RATIO value="0"></E_LOD_RATIO>
<E_VIEW_DIST_RATIO value="100000"></E_VIEW_DIST_RATIO>{code}

After you've edited the *MapScreenshotSettings.xml*, you can press *Generate MiniMap*. This will again create a minimap image file and an .xml file, the .xml file you can safely delete as there's no need for it.

h3. Step 3

Now go back to Photoshop and open up the minimap file the editor just created. Select the whole image by going to Select>All and select copy under Edit>Copy.

Go to your minimap that you want to add detail to under Edit>Paste, and place in the copied image.

h3. Step 4

After you've done all that, it's time to resize the image you just pasted onto the minimap.

This is where the calculator will come in handy for you. If your minimap was created with a *Camera Height* of 512 for example, you should preferably generate the smaller minimaps in increments such as 256 or 128 etc.

If, for example, you generated smaller minimaps with 128, that will need to be divided by 512 to calculate the scaling percentage (128/512 = 0.25, which equals to 25% scaling.)


h3. Step 5

When you've successfully scaled your minimap piece to its correct size, you'll need to move it to its correct position on the original minimap. emember to double check if it really fits correctly.

Repeat steps 2 to 5 as many times as you want to ensure that your minimap has a high level of quality. With a little bit of extra work you will have a very high quality minimap.