A guide for EaaS about shipping and distributing a game to end users.
For more information, discussion and feedback of releasing EaaS projects, please refer to the CRYENGINE Community thread.
This document applies to CRYENGINE version 3.8.6 and newer,
Open a command prompt, and make
<root>/Tools/PakEncrypt the current directory.
This should create a
Never give out your key.dat file to anyone you don't trust.
In your favorite C++ IDE open the generated
key.h file, and also
<root>/Code/GameSDK/GameDll/GameStartup.cpp (or the same file in your game DLL).
Now find this line in the GameStartup file:
Make sure that
USE_RSA_KEY is set to 1.
Replace the key in
GameStartup.cpp with the key from the generated
It's not required to provide the RSA key for profile or debug configurations.
In the file
<root>/Code/GameSDK/GameDll/GameStartup.cpp there is a function:
Here, you can add/remove CVars that may be modified by the end-user (or via system.cfg etc).
Any CVar that is not listed will be fixed in it's default value when in Release mode.
To prevent trivial cheats, it may help to keep this list as small as possible.
However, think of the target machines of end-users and don't freeze quality CVars at too high quality levels.
You should compile your code in the
[GameSDK] Release (and
[GameSDK Server] Release if you use dedicated servers in your project) configuration for your target platforms.
You will get several DLL files in a <
platform>_release folder if this succeeds, that reflect the optimized and better secured versions of their non-release counterparts.
Don't mix release with non-release DLLs (ie, don't rename DLLs), because they are NOT compatible and the end result will be unstable, if it runs at all.
We will not go into detail in this document on how to pack your assets, but we assume you have all the assets required by the game packaged into appropriate PAK files.
After a release build, all assets must be inside a signed or encrypted PAK files.
The first test to see if your PAK files are alright would be to run the non-release game after deleting all non-PAK files.
See also Compiling Assets for Multiple Platforms and the RCJob_Build_SDK.xml that has been shipped to you.
Copy ONLY the following files to a new folder that will contain all the files for the final version of your project (ie, the distribution)
Files and folders marked in red should NOT be copied, but are provided in the list for completeness sake.
For the sake of example, this will only show binaries for 64-bit Windows support. For 32-bit Windows and Linux support, substitute the appropriate platform instead of "win_x64" in the folder names below, e.g. win_x86 for 32-bit Windows or linux_x64_clang for Linux using Clang as the compiler. On Linux, note that some files will be named slightly differently (e.g. libXXX.so instead of XXX.dll).
|bin\win_x64_release||CryXXX.dll||Compiled from your game code|
|GameXXX.exe||Shipped by Crytek in EaaS package|
Note: You can rename this exe if you want
Dependencies, shipped by Crytek
|bin\win_x64 and bin\win_x64_dedicated||NEVER copy these folders!|
These files are debug/profile builds and not suitable for release.
Additionally, the Editor is included in bin\win_x64, which you cannot redistribute Editor to end-users according to your EULA.
Also, Steam DRM protection is present in the Editor that would make it unusable to anyone without an EaaS license.
Compiled from your game code
|Shipped by Crytek in EaaS package|
|Shipped by Crytek in EaaS package|
PAK files, e.g.:
Your packaged assets - the exact list of PAK files will depend on how you organize your assets; the listed files represent the structure in the EaaS package by Crytek
(or relative to
|Each level folder (e.g. Singleplayer/Woodland) may have:|
<LoadingScreen>.dds (if you have defined one)
Your exported levels
|Your supported languages for which your project is localized|
|<all files and sub-folders>||These folders contain no end-user usable files, save some space by not shipping them|
The user folder should only have user-specific settings and will be regenerated automatically by the end-user
If you have settings that you expect all users to have, consider moving them to system.cfg instead of user.cfg
|<root>||system.cfg||Make sure the |
|Do not ship these files: it will make it harder to identify if a log-file was user generated or not|
Additional files specific to your project may have to be added as well, in which case it's your responsibility to ensure they are added in the correct location and are loadable.
Consider putting those files inside a custom PAK file, if you want to leverage the existing signing/encryption features.
Carefully consider legal obligations on re-distribution that may apply on software and assets as well, make sure to read license agreements etc.
Some additional space can be saved if you can ensure that the Visual C++ 2012 runtime is installed on the end-users machine during project deployment / installation.
Note for users that are not using Visual C++ 2012 compiler, make sure that runtimes (if any) are either shipped or are installed in some other way.
We recommend against mixing runtimes from different Visual C++ editions, since it can (theoretically) cause hard to diagnose bugs.
Once you have your staging folder set-up, you need to either sign OR encrypt your asset PAK files.
Depending on your project, you should pick one of those:
Since the engine can decrypt the encrypted assets at run-time off-line, this is not a 100% secure way to protect your assets if the project is intended to be run off-line.
A signed or encrypted PAK file cannot be renamed after signing/encryption, because the filename (excluding folder names) are part of the signature.
Once you have decided what level of security you want:
<root>/Tools/PakEncryptthe current directory (the same folder that has the
key.datfrom the one-time setup).
dist/ParseBuild/ParseBuild.exe <verb> "<full path to your staging folder>" "<full path to an output folder>"
encrypt, depending on the method you picked
Now the files from the staging folder will be copied from the staging folder to the output folder.
You can now delete the staging folder to recover some disk space.
As an optimization, you can also copy only PAK files into the staging folder (keeping the correct folder structure), and copy all non-PAK files directly to the output folder (with the same structure), which saves a copy operation for those files.
Now you can take the contents of the output folder and test or redistribute it.
You should in general make sure your entire project works when you directly run any of the .exe that is in the output folder, without adding any additional files.
Testing this ensures that all your code and assets are present and functional for end-users.
Try to run the project on a variety of hardware configurations to find out quality settings for your minimum advertised hardware specifications.
If you wish to be able to debug crash-dump files that are generated by your project, make sure to keep a copy of all the .pdb files that are matching the binaries that you redistribute (for each version that may be live).
These .pdb files needn't be distributed as long as you can find the matching ones when loading the end-user's dump file.
Redistributing via a specific publishing platform (ie, Steam) is outside the scope of this document. You should probably read the documentation provided by the publishing platform to find out how it works.
The same comment applies to installers of various kinds, as long as the directory structure is maintained and all the files mentioned above are present, the project should be runnable.
Sometimes it's hard to debug issues with Release builds, because code is optimized and assets may not be easily accessible.
Here are some pointers to isolate problems:
Make sure that:
Make sure that:
Make sure that:
This is not a fatal error, however you can convert your XML files to binary XML using RC, see also Binary XML conversion
The conversion is recommended for an end-user distribution
Please note that you should connect release clients with release servers. (And also, you should connect profile/debug clients with profile/debug servers)
The default value of log_severity in release builds are quite low, so to debug an issue it might make sense to set it to 3 or 4 to get more information and messages.
Note that, unless you whitelist this CVar, setting it in system.cfg will not actually work.